FOX 2.0 Performance Series Racing ATS Steering Stabilizer
JK
Product Resources
Features & Product Details
The Fox Performance Series Adjustable Through Shaft (ATS) steering stabilizer offers abundant steering control, and tames unwanted steering forces in both directions. This unit replaces your conventional stabilizers, and it will also respond to your input with 24 clicks of external adjustment to fine tune the feel. The integrated reservoir allows for additional fluid capacity, and improves cooling under extreme conditions.
Also included is FOX’s relocating hardware that moves the steering stabilizer up, and out of the way utilizing a new track bar relocation bolt and tie-rod mounting clamp.
Please note that if installing the stabilizer on 2012 and newer models with stock suspension or with less than a 2.5” lift and aftermarket 1 ¼” bump stop extension; the stabilizer reservoir must be rotated for clearance. Loosen pinch bolt on L-bracket between stabilizer and track bar clamp, rotate reservoir approximately 135 degrees down, and toward the rear of the vehicle.
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
QUESTIONS & ANSWERS
-
Q: Steering stabilizer. Fox 2.0 ATS chris martindale3 years ago
I will soon be purchasing the rock crawler tie rod and curious if this will fit or will need additional stuff...it'll be going on a stock Rubicon tie rod first...2013 jeep rubicon
-
-
0 of
0 people found the
following answer helpful
A: Yes, the stabilizer can be used on multiple set ups, as long as the clamp size matches the diameter of the tie rod.
Northridge Chris @ Northridge4x4 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fitment Evospider 3 years ago
-
-
1 of
1 people found the
following answer helpful
A: You'll want a clamp that is 1 3/4 to fit with your tie rod. The stabilizer comes with everything needed to install.
Northridge Chris @ Northridge4x4 3 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: Fit? Upsman3474 4 years ago
-
-
0 of
0 people found the
following answer helpful
A: You will need a 1.5" clamp to make this fit onto your Rubicon Express on your JK/JKU.
Northridge Chris @ Northridge4x4 4 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful